代表性论文及著作
代表性论著:
成果涵盖工业烟气治理、碳捕集与利用、生物质资源化等研究领域。
部分代表论文如下:
[1]Cui YK, Xing Y, Zheng Y, et al. Understanding the Key Role of Cations in Water Tolerance during the CO2/CO Separation Process under Low-Humidity Conditions, Environmental Science & Technology, 2025, 59(10): 5109-5118
[2]Che ZC, Cheng S, Cui Y, et al. Sintering flue gas circulation optimization under the combined benefits of carbon dioxide and air pollutant emission reduction, Energy, 2025, 322: 135546
[3]Ma MY, Su W, Wang Y, et al. Absorption of HCl on sodium-based absorbents at medium and high temperatures: The effect of competing absorption of SO2 and H2O, Fuel, 2024, 358: 130007
[4]Li ZJ, Xing Y, Ma MY, et al. Towards the co-benefits of carbon capture, utilization and sequestration: A life cycle assessment study for steel slag disposal, Journal of Cleaner Production, 2024, 443: 141166
[5]Su W, Liu XM, Tian JL, et al. Carbon-water nexus of China's iron and steel industry through CCUS technology development, Journal of Cleaner Production, 2025, 525, 146508
[6]Wang JQ, Xing Y, Jia HQ, et al. TiO2-coated CeCoOx-PVP catalysts derived from Prussian blue analogue for synergistic elimination of NOx and o-DCB: The coupling of redox and acidity, Chemical Engineering Journal, 2023, 476:146390
[7]Cui YK, Su W, Xing Y, et al. Experimental and simulation evaluation of CO2/CO separation under different component ratios in blast furnace gas on zeolites, Chemical Engineering Journal, 2023, 472: 144579
[8]Su W, Liu P, Cai CQ, et al. Hydrogen production and heavy metal immobilization using hyperaccumulators in supercritical water gasification, Journal of Hazardous Materials, 2021, 402: 123541
[9]Wang JQ, Xing Y, Su W, et al. Bifunctional Mn-Cu-CeOx/γ-Al2O3 catalysts for low-temperature simultaneous removal of NOx and CO, Fuel, 2022, 321:124050
[10]Li X, Wang L, Xing Y, et al. Research progress in photo/electrocatalytic reduction of CO2 by functionalized MOFs [J]. Sustainable Energy & Fuels, 2022.15.
代表性标准:
[1]国家标准《钢渣碳酸化固定二氧化碳含量的测定方法》,GB/T 39713-2020
[2]国家标准《烧结用钢渣》,GB/T 32577-2016
[3]国家标准《钢渣加工和金属回收技术规范》,GB/T 39714-2020
[4]行业标准《钢铁企业链篦机回转窑球团工艺烟气脱硝技术规范》,YB/T 4862-2020
[5]行业标准《烧结烟气中温选择性催化还原法脱硝技术规范》,YB/T 4750-2019
[6]行业标准《烧结 / 球团湿法脱硫烟气旋流管式静电除尘技术规范》,YB/T 4863-2020